Series FX5

Technical features:
Working temperature: -20°C ÷ +80°C
Switching frequency: 200 cycles/min
Setting point: Through the international serial RS232 connection is it possible to entirely control the pressure switch with a dedicated software, whereby the operator can set from pc two alarm thresholds with adjustable hysteresis, change each output contacts into NO or NC depending on the application, adjust the hysteresis independently and display the value pattern of pressure in real time on the screen. The access system with password also ensures the maximum safety from unexpected changes of the operating parameters.
The software can be downloaded free on our website www.fox.it
Switching accuracy: 1% of end of scale at 20°C
Hysteresis value: adjustable over the whole scale
Range of the adjustment: from 1% to 100% of end of scale

...Keep reading...

 Weight: 0,26 kg
Mechanical life: 10x106 cycles at 20°C
Body: 40x40mm square in AVP steel; wetted parts in AVP steel with ceramic sensor
and integral seal in NBR
Installation: in every position with ¼” BSP-F threaded port or Cetop
flange without necessity of adaptors
Electric Features:  
- Maximum contact load: 0,5 A
- Exchange contacts (Common, NO and NC) – SPDT
- Electric connection according to DIN43650, M3
- Electric connection according to IEC60947-5-2, M12
- Electric protection according to CEI EN 60529, IP65
- Medium consumption: <50 mA
- Power supply: from 12 to 24 Volt
- Interference emission and immunity according to EN 61.326
Warranty: see dedicated page
Spare parts: see dedicated page
Also available:  
- execution with regulation range -1>0 bar
- Special max pressure
- Special electrical connection
- Special value of hysteresis       
- CU-TR for Russian market
GoogleDrive Technical data sheet Istruzioni di settaggio Request an estimate
< Back to product list