Series KL5

Working temperature:  -20°C ÷ +80°C
Switching frequency: 200 cycles/min
Setting point: The maximum operating point is found acting on the right button “+MAX”; to decrease the value acting on the button “-MAX”. The minimum pressure operating point (hysteresis) is found by acting on the both keys (MIN). The red led, will light up once that the key is correctly pushed.
Switching accuracy: ± 1% of end of scale at 20°C
Hysteresis value: adjustable between 2% and 90% of the set value (minimum hysteresis 2 bar).
By lowering the maximum pressure if the minimum pressure is reach, the latter is automatically lowered while keeping the minimum hysteresis.


...Keep reading...

Weight: 0,3 Kg
Mechanical life: 10x106 cycles at 20°C
Body: 30x30mm square in anodized aluminium
Wetted parts: in stainless steel AISI 316 L with ceramic sensor and integral seal in NBR
Installation: in every position with ¼” BSP-F threaded port or Cetop 
flange without necessity of adaptors
Electric Features: 
- Maximum contact load: 0,5 A
- Exchange contacts (Common, NO and NC) – SPDT
- Electric connection according to DIN43650, M4
- Electric connection according to IEC60947-5-2, M12
- Electric protection according to DIN40050, IP65
- Medium consumption: 20 mA
- Power supply: from 12 to 24 Volt
- Non-volatile memory: EEPROM
Warranty: see dedicated page
Spare parts: see dedicated page
Also available:
- execution with regulation range -1>0 bar
- Special max pressure
- Special electrical connection
- Special value of hysteresis       
- CU-TR for Russian market

GoogleDrive Technical data sheet Request an estimate
< Back to product list